How to Make Lamp shade – Rich Metal Spinning Case

Spinning of lampshadeThe above conclusions show that Deep Drawing To a great extent, it can bring new vitality to the market and make the industry develop well. https://www.richspinning.com/?spinningservice/

(1) Appearance features: curved mother line shape;

(2) Workpiece material: aluminum 1060

(3) Blank size: $520×1.2

(4) Forming tool: one SR (A, D.250, r10) hard spinning wheel, one rolled edge die, one curling die

(5) Blank speed: 540r/min

(6) Spinning wheel feed ratio: 1.0mm/r18

(7) Processing time: 3 min

(8) Processing sequence:

¢Ù Shearing spinning (point A) followed by multiple deep drawing spinning ¡ú ¢Ú Trimming ¡ú ¢Û Curling;

9) Processing points:

1) Pre-bend the outer edge of the rough piece to prevent wrinkling during spinning;

2) Start spinning by shearing to point A, and then use multiple passes of deep drawing and spinning;

3) Consider the shape of the profiling plate to make the forming at point A smooth transition;

4) During the deep drawing and spinning process, use a back pressure roller if necessary. But be careful to avoid damaging the material. Use a soft back pressure roller if necessary

5) Use a hard plastic spinning wheel and a steel core mold, or a steel spinning wheel and a resin core mold;

6) The trimming knife should be made at a 15¡ã bevel to facilitate the curling of the flange after cutting.