Big Eagle Services
Pressure Testing
Big Eagle has a full line of high pressure BOP testing trucks as well as production transfer and injection units.
BOP Pressure Testing
Big Eagle’s line of 5 tonne high pressure BOP testing trucks are equipped with mechanical or electronic pressure recording capability. An electric flow meter calculates accurate injection rates and total fluid volumes pumped.
Pressure capabilities range from 0 - 15,000psi and volumes of 3 - 45 litres per minute injection rates. These units have a test fluid hauling capacity up to 2,000 litres and are equipped with high pressure rated fittings.
All pumps are certified for pumping dangerous goods safely. They can service cement squeezes, formation integrity tests and leak off tests as well as have a skid unit for performing remote jobs with the capability of 70,000kpa pressure.
Production Transfer and Injection Units
Their 2 - 5 tonne pressure trucks are equipped with 2 or 4 wheel drive and have the hauling capacity of 3,000 - 6,000 litres. They are equipped to pump 15 - 150 litres per minute or 50 - 500 litres per minute and are capable of 0 – 3,500psi or 0 – 6,000psi. Two or three compartment units allow for hauling of various fluids at once.
Service Divisions
- Nitrogen
- Hydro-Vac
- Vacuum
- Water
- Steam
- Mulching
- Pressure & Injection
- Coil Tubing
- Shoring
- Hot Oiling
- Pile Driving
- Oilfield Hauling
- End Dump / Gravel
- Rathole Drilling
- Sour Seal
Pressure Tester Benefits
- BOP testing.
- Pipeline testing.
- Formation leak off testing.
- Methanol pumping.
- Casing tests.
- Wellhead testing.
- Packer isolation tests.
Pressure Tester Features
- 5 tonne units can carry 2,000 litres.
- Capacity from 3,000 to 10,000psi.
- Pressure to 70,000kpa.
- Every truck can pump as low as 2-3 litres per minute for any slow rate pumping (ie: cement squeezes).
- Recalibrate our charts and gauges and follow strict time limits.
- Inspect all of our crossovers and test subs and follow strict time limits.
- All pumps are certified for pumping methanol and other dangerous goods safely without risk of damage to the pump or any spilling hazards.
- Use only high pressure fittings and hoses and carry an extra assortment on each truck.
- Carry a large assortment of test cups on each truck.
- All tanks on our new trucks are certified for hauling many types of fluids.
5 Tonne BOP pressure testing unit on location at a drilling platform site.